1
|
- Chapter 7
- First-Order Circuits
|
2
|
- 7.1 The Source-Free RC Circuit
- 7.2 The Source-Free RL Circuit
- 7.3 Unit-step Function
- 7.4 Step Response of an RC
Circuit
- 7.5 Step Response of an RL Circuit
|
3
|
- A first-order circuit is characterized by a first-order differential
equation.
|
4
|
- The natural response of a circuit refers to the behavior (in terms of
voltages and currents) of the circuit itself, with no external sources
of excitation.
|
5
|
- The key to working with a
source-free RC circuit is finding:
|
6
|
- Example 1
- Refer to the circuit below,
determine vC, vx, and io for t ≥
0.
- Assume that vC(0) =
30 V.
|
7
|
- Example 2
- The switch in circuit below is
opened at t = 0, find v(t) for t ≥ 0.
|
8
|
- A first-order RL circuit consists of a inductor L (or its equivalent)
and a resistor (or its equivalent)
|
9
|
|
10
|
|
11
|
- The key to working with a
source-free RL circuit is
finding:
|
12
|
- Example 3
- Find i and vx in the
circuit.
- Assume that i(0) = 5 A.
|
13
|
- Example 4
- For the circuit, find i(t) for
t > 0.
|
14
|
- The unit step function u(t) is 0 for negative values of t and 1 for
positive values of t.
|
15
|
- voltage source.
- for current source:
|
16
|
- The step response of a circuit is its behavior when the excitation is
the step function, which may be a voltage or a current source.
|
17
|
- Integrating both sides and considering the initial conditions, the
solution of the equation is:
|
18
|
- Three steps to find out the step
response of an RC circuit:
|
19
|
- Example 5
- Find v(t) for t > 0 in the
circuit in below. Assume the switch has been open for a long time and is
closed at t = 0.
- Calculate v(t) at t = 0.5.
|
20
|
- The step response of a circuit is its behavior when the excitation is
the step function, which may be a voltage or a current source.
|
21
|
- Three steps to find out the
step response of an RL circuit:
|
22
|
- Example 6
- The switch in the circuit shown
below has been closed for a long time. It opens at t = 0.
- Find i(t) for t > 0.
|