CURRENT SOURCES SHARED BY MESHES - THE GENERAL LOOP APPROACH
THE STRATEGY IS TO DEFINE LOOP CURRENTS
THAT DO NOT SHARE CURRENT SOURCES -
EVEN IF IT MEANS ABANDONING MESHES
FOR CONVENIENCE START USING MESH CURRENTS
UNTIL REACHING A SHARED SOURCE. AT THAT
POINT DEFINE A NEW LOOP.
IN ORDER TO GUARANTEE THAT IF GIVES AN
INDEPENDENT EQUATION ONE MUST MAKE SURE
THAT THE LOOP INCLUDES COMPONENTS THAT
ARE NOT PART OF PREVIOUSLY DEFINED LOOPS
A POSSIBLE STRATEGY IS TO CREATE A LOOP
BY OPENING THE CURRENT SOURCE
THE LOOP EQUATIONS FOR THE LOOPS WITH
CURRENT SOURCES ARE
THE LOOP EQUATION FOR THE THIRD LOOP IS
THE MESH CURRENTS OBTAINED WITH THIS
METHOD ARE DIFFERENT FROM THE ONES
OBTAINED WITH A SUPERMESH. EVEN FOR
THOSE DEFINED USING MESHES.
